Mercedes Sprinter 907 2018 Onwards Tubular Rear Door Spare Wheel Carrier

Fits:

• Mercedes Sprinter 2018 onwards

Both 6x130 (Single) and 6x205mm(Dually) PCDs

Fixings required to fit the wheel carrier to the van are supplied.

Wheel Carriers bolt to the existing hinges on the door and require a single hole drilling in the skin of the door.

The third fixing point through the door skin is through a structural part of the door. You are not only fixing to the outer skin - but through the inner structure of the door too.

The door does not need removing to fit this product.

Always test fit any bolt-on product before painting to be sure it fits. We will not reimburse for painting if the part is not test fitted prior to painting.

All drilled holes will require any bare metal painting to prevent corrosion. We also bond the door skin mount and the door skin which removes the point load off the bolts whilst also sealing up the hole to prevent water ingress.

• Product weight: 8KG
• MIG welded using lightweight Mild Steel ERW tube
• Jig Built
• Lasercut and CNC formed components
• Supplied uncoated for you to finish before installation

Like all our handmade spare wheel carriers, this Mercedes Sprinter 907 2018 Onwards Tubular Rear Door Spare Wheel Carrier is made right here in North Yorkshire.

Wheel carriers are made to order; typically on a 10-day lead time. Following an order, your wheel carrier is added to our production planner and we aim manufacture and ship your order as quickly as possible.