Man TGE / VW Crafter Shorty Tubular Rear Door Ladder NS

This product will fit any rear doors for this van. You do NOT need to change or modify your hinges to fit this product.

If your van has 180 degree hinges the door will still open 180 degrees.

If your van has 270 degree hinges your door will open 160 degrees.

Fits:

• Volkswagen Crafter 2018 onwards
• MAN TGE 2018 onwards

Our Rear Door Ladders bolt on to the rear door through the van's hinge fixings with one additional bolt through the skin of the door; this gives a simple, proven and stable ladder connection to the vehicle.

If your door has the rubber stopper in the middle of the door the ladder uses this hole to bolt through. Otherwise you need to drill this hole through the door skin. If you already have this hole - the ladder is a bolt on solution with no holes needing drilling for install!

The door does not need removing to fit this product.

All drilled holes will require any bare metal painting to prevent corrosion. We also bond the door skin mount and the door skin which removes the point load off the bolts whilst also sealing up the hole to prevent water ingress.

Always test fit any bolt-on product before painting to be sure it fits. We will not reimburse for painting if the part is not test fitted prior to painting.

Weight: 8KG

Built to fit the left hand rear door

Built to fit both high and low roof versions. This is the shorty after all! (H1, H2 and H3).

Like all our handmade ladders, this Man TGE / VW Crafter Shorty Tubular Rear Door Ladder NS is made right here in North Yorkshire.

Ladders are made to order; typically on a 4 week lead time. Following an order, your ladder is added to our production planner and we aim manufacture and ship your order as quickly as possible.