Mercedes Sprinter 907 ab 2018, röhrenförmige Hintertürleiter

This product will fit any rear doors for this van. You do NOT need to change or modify your hinges to fit this product.

If your van has 180 degree hinges the door will still open 180 degrees.

If your van has 270 degree hinges your door will open 160 degrees.

Fits: Mercedes Sprinter 2018 onwards

Our Rear Door Ladders bolt on to the rear door through the van's hinge fixings with one additional bolt through the skin of the door; this gives a simple, proven and stable ladder connection to the vehicle.

Once mounted on the hinges there is one hole to drill through the middle of the door. This is easily marked out using the ladder itself.

The door does not need removing to fit this product.

All drilled holes will require any bare metal painting to prevent corrosion. We also bond the door skin mount and the door skin which removes the point load off the bolts whilst also sealing up the hole to prevent water ingress.

Always test fit any bolt-on product before painting to be sure it fits. We will not reimburse for painting if the part is not test fitted prior to painting.

Weight: 10KG

Built to fit the right hand rear door

Available in Low Roof (H1) and High Roof Variants (H2/H3)

Does not interfere with factory parking sensors

Like all our handmade ladders, this Mercedes Sprinter 907 2018 Onwards Tubular Rear Door Ladder is made right here in North Yorkshire.

Ladders are made to order; typically on a 4 week lead time. Following an order, your ladder is added to our production planner and we aim manufacture and ship your order as quickly as possible.