2018+ Volkswagen Crafter / MAN TGE OS Hintere Rohrleiter ab 2018

No hinge modifications required to fit this ladder.

This product will fit any rear doors for this van model. You DO NOT need to change or modify your hinges to fit this product.

If your van has 180 degree hinges the door will still open 180 degrees. If your van has 270 degree hinges your door will open 160 degrees.

Built to fit the right hand rear door

• Available in Low Roof (H1) and High Roof Variants (H2/H3)
• Does not interfere with factory parking sensors

Our Rear Door Ladders bolt on to the rear door through the van's hinge fixings with one additional bolt through the skin of the door; this gives a simple, proven and stable ladder connection to the vehicle.

If your door has the rubber stopper in the middle of the door the ladder uses this hole to bolt through. Otherwise you need to drill this hole through the door skin. If you already have this hole - the ladder is a bolt on solution with no holes needing drilling for install!

The door does not need removing to fit this product.

All drilled holes will require any bare metal painting to prevent corrosion. We also bond the door skin mount and the door skin which removes the point load off the bolts whilst also sealing up the hole to prevent water ingress. 

Always test fit any bolt-on product before painting to be sure it fits. We will not reimburse for painting if the part is not test fitted prior to painting.

• Product weight: 10KG
• MIG welded using lightweight ERW tube.
• Lasercut and CNC formed components.
• Supplied uncoated for you to finish before installation.

Like all our handmade ladders, this 2018+ Volkswagen Crafter / MAN TGE OS Rear Tubular Ladder 2018+ is made right here in North Yorkshire.

Ladders are made to order; typically on a 4 week lead time. Following an order, your ladder is added to our production planner and we aim manufacture and ship your order as quickly as possible.