Zu Produktinformationen springen
1 von 7

Relay/Ducato/Boxer/Jumper Rohr-Hecktürleiter ab 2006

Relay/Ducato/Boxer/Jumper Rohr-Hecktürleiter ab 2006

MIG welded mild steel ladder designed to fit Citreon Relay, Fiat Ducato, Peugeot Boxer Tubular Rear Door Ladder 2006-present. Designed and manufactured in Yorkshire by the Wheeliams team. Our ladders are made to order, with a lead time of around 4 weeks. Supplied unfinished in bare metal for you to finish as you wish.

Normaler Preis £430.00
Normaler Preis Verkaufspreis £430.00
Sale Ausverkauft
Inkl. Steuern.
Größe

MORE DETAILS

Vehicle Requirements

Fits:

  • Citroen Relay 2006 onwards
  • Citroen Jumper 2006 onwards
  • Fiat Ducato 2006 onwards
  • Peugeot Boxer 2006 onwards
  • Vauxhall Movano 2021 onwards

Installation

Fixings required to fit the ladder to the van are supplied.

Our ladders bolt to the existing hinges on the door and require two holes drilling in the skin of the door and one hole drilling through each hinge. This wheel carrier can be fitted to vans with 180degree hinges.

Always test fit any bolt-on product before painting to be sure it fits. We will not reimburse for painting if the part is not test fitted prior to painting.

Historically these doors have been very weak around the area that the hinge bolts to. They are common to crack here. By fitting a wheel carrier that braces over the top of the door spanning between the hinges and the door you are actually strengthening this area and therefore making your door less likely to crack in this place. Fitting the wheel carrier stops the hinge from flexing the side of the door which is what causes the stress cracks.

All drilled holes will require any bare metal painting to prevent corrosion. We also bond the door skin mount and the door skin which removes the point load off the bolts whilst also sealing up the hole to prevent water ingress.

Following your order confirmation, you will receive an email with fitting instructions for this product. If you would prefer to study these before placing an order - please don’t hesitate to get in touch.

Construction

Weight: 10KG

Built to fit the right hand rear door

These fit all models with double glazed plastic rear windows too. The ladder has been designed to work around these windows.

Available in Low Roof and High Roof Variants. High roof shown in photos.

Does not interfere with factory parking sensors

Made in Yorkshire

Like all our handmade ladders, this Relay/Ducato/Boxer/Jumper Tubular Rear Door Ladder 2006-present is made right here in North Yorkshire.

Lead Time

Ladders are made to order; typically on a 4 week lead time. Following an order, your ladder is added to our production planner and we aim manufacture and ship your order as quickly as possible.

Vollständige Details anzeigen