Zu Produktinformationen springen
1 von 3

Wheeliams Modular BackRack - Rear door cargo storage system

Wheeliams Modular BackRack - Rear door cargo storage system

Designed and manufactured by our team in Yorkshire, our new Cargo Backrack is a modular carrying solution. Whether you want to carry boxes, bikes, Jerry cans or other accessories - this solution makes sure you have fixing points just where you need them.

Being able to move or even remove the horizontal aluminium rails gives you ultimate flexibility when it comes to rear door external storage.

These are made to order on a lead-time of 4 weeks.

Normaler Preis £650.00
Normaler Preis Verkaufspreis £650.00
Sale Ausverkauft
inkl. MwSt.


Vehicle Requirements

We have manufactured different models to fit either: 

  • Mercedes Sprinter 906 - 2006-2018
  • Mercedes Sprinter 907 2018+
  • Volkswagen Crafter 2006-2018
  • Volkswagen Crafter 2028+
  • MAN TGE 2018+
  • Ford Transit MK8 2014+
  • Citroen Relay 2006 onwards
  • Citroen Jumper 2006 onwards
  • Fiat Ducato 2006 onwards
  • Peugeot Boxer 2006 onwards
  • Vauxhall Movano 2021 onwards


NO DRILL. This accessory is designed to bolt onto your van without drilling a single hole and can be fitted or removed in minutes. **

**Ford Transit MK8 is not 'drill free'

** Ducato/Boxer/Relay/Movano is not 'drill free'.

NO Hinge mod or Hinge swap. This accessory will fit your van regardless of which hinges you have fitted. So there’s no messing around! (Sprinter&Crafter)

The rear door does NOT need removing to fit this accessory  

Fits all van heights and van lengths.

Fixings required to fit the backrack to the van are supplied.

The backrack bolts to the existing hinges on the door and through the badge holes. The badge needs removing to fit this product.

The door does not need removing to fit this product.

Always test fit any bolt-on product before painting to be sure it fits. We will not reimburse for painting if the part is not test fitted prior to painting.

All drilled holes will require any bare metal painting to prevent corrosion. We also bond the door skin mount and the door skin which removes the point load off the bolts whilst also sealing up the hole to prevent water ingress. 


Supplied raw for you finish as you wish. 

By carefully using a mix of steel and aluminium components we have been able to manufacture this to be strong enough but also weigh only 15kg.

If you are unsure which model you need - feel free to drop us a photo of your van and we can confirm the model. 

Additional Information

Made in Yorkshire

Lead Time

Vollständige Details anzeigen